Tinyminime
medical school grad
Joined: 08 May 2007
Posts: 69
Location: Auckland NZ
 |
 Posted: Mon May 21, 2018 12:33 am Post subject: moisture damage in the machines |
  |
|
Hello all
I am wondering if we are alone with excess moisture in the machine from the fusing system. We are finding rust on metal plates and on the LED heads in the machine. These are higher volume machines but they are only at the 100k lin meter mark. The image quality is not affected just the coronas need excessive cleaning etc
Our 970 is way worse. The moisture is forming on the belt causing yellow drop out. The design is a problem i believe. hot fuser! cold belt! 3 inches apart...
I am keen to hear from others who may have had this issue.
_________________
I used to have hair!!! |
|
