|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
dlee doctor
Joined: 07 Nov 2006 Posts: 1459 Location: E. Syracuse NY |
Posted: Thu Nov 09, 2017 11:21 am Post subject: 1200 stacker w/9000 |
|
|
I have a 1200 stacker that was previously on a 5000, I just put it behind a 9000 and it's not communicating. There is power, the light is on by the switch and the lights on the board are flickering. The #1 switch on the board is up and all others are down. When I send a print, the stacker remains idle. The 9000 had an old Xerox 1200 stacker on it and I even swapped out the sensors on the stackers, even though they are the exact sensors. What am I missing here? |
|
|
|
|
|
|
|
|
|
|
bigal doctor
Joined: 17 Apr 2007 Posts: 352 Location: TEXAS |
Posted: Thu Nov 09, 2017 6:45 pm Post subject: Auto Stacker |
|
|
On the 9000 Kip added a service mode "AA" to auto detect the stacker with firmware K115-0901A
Set to "0" Stacker is auto detected
Set to "1" Stacker is disabled
(seems backwards??But....)
Service Bulletin TB-K115-019
Check to see if its on by entering the service mode. |
|
|
|
|
|
|
|
|
|
|
dlee doctor
Joined: 07 Nov 2006 Posts: 1459 Location: E. Syracuse NY |
Posted: Fri Nov 10, 2017 11:16 am Post subject: |
|
|
Would this affect going from an old eprom stacker to a newer switch stacker? We've had an old 1200 stacker (15+ years old) behind our 9000. It was just getting old and squeaky. We got this newer 1200, which was attached to a KIP5000 and it was working flawlessly, at the time. The way I look at it, I should've been able to swap the two stackers with no issues. The newer stacker is unresponsive to the 9000. I put back the old stacker and it works fine. I'm starting to wonder if it's a mechanical issue because the motor/wheels do not rotate at all. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|