|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
RLE medical school freshman
Joined: 27 Oct 2006 Posts: 24
|
Posted: Wed Jul 19, 2017 4:49 pm Post subject: 3000 scanner |
|
|
Insert an original for either Copy or ScanToFile: The unit detects the original
and it's all systems go, but it does not physically pull in the original and then "original misfeed" is displayed.
Have a feeling the scanner motor or motor driver is the culprit.
Would like to check the motor operation in the Device Operation Mode, but the scanner motor is not listed in this operation. (?)
Any ideas? |
|
|
|
|
|
|
|
|
|
|
RLE medical school freshman
Joined: 27 Oct 2006 Posts: 24
|
Posted: Wed Jul 19, 2017 5:22 pm Post subject: |
|
|
I can open the scanner just enough to physically push an original through by hand. When I do that the unit produces a copy. All the scanner functions appear to work except the motor.
Maybe it's time to replace the scanner Power Board where the motor driver is located?
Anyone seen this? |
|
|
|
|
|
|
|
|
|
|
slyman doctor
Joined: 23 Apr 2008 Posts: 467 Location: Sherbrooke,Quebec |
Posted: Thu Jul 20, 2017 5:18 pm Post subject: |
|
|
I don't remember exactly but I thing there is a driving belt who's driving all the rollers, is this one is ok ?
Maybe a bad sensor ? Interchange it with another for testing.
I've already replace some scanner main pcb for differents problems, if you have one spare, just test it and see.
Scanner firmware ?
good luck |
|
|
|
|
|
|
|
|
|
|
RLE medical school freshman
Joined: 27 Oct 2006 Posts: 24
|
Posted: Wed Aug 23, 2017 4:20 pm Post subject: |
|
|
Yes, the belt is in place, good and tight.
The lead sensor, it detects the original when inserted. The trail edge sensor is good, I can physically push and pull a document through the scanner and successfully scan the document without error.
I was hoping there was a way to test the scanner motor function before replacing parts, looks like I have no option at this point.
Thanks for the reply! |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|