 |
|
|
|
|
|
|
|
|
|
KipCody
medical school grad
Joined: 16 Jul 2013
Posts: 65
Location: Knoxville, TN
|
 Posted: Wed Nov 23, 2016 2:01 pm Post subject: Clicking Sound |
  |
|
I've got an 880 out in the field that over the past couple of days has developed a clicking sound coming from the K developer. I've already swapped the motor with another unit to rule it out and the problem didn't follow it. Just wanted to see if anyone else has dealt with anything like this on these developers before.
So long and thanks for all the fish. |
|
| |
|
|
|
|
|
|
|
|
KipCody
medical school grad
Joined: 16 Jul 2013
Posts: 65
Location: Knoxville, TN
|
| Posted: Wed Dec 07, 2016 5:08 pm Post subject: |
|
|
| So as it turns out the issue was coming from the 24T Helical gear on the non drive side. Something caused it to bind up to the point where the post that holds the gear was broken off of the housing. |
|
| |
|
|
|
|
|
|
|
|
samiam
medical school freshman
Joined: 25 Sep 2007
Posts: 27
|
| Posted: Tue Jan 31, 2017 1:20 pm Post subject: Clicking noise |
|
|
| Clicking noise from K developer also, followed by an E-0336. (Process 1 Density Compensation Error) .Will update!! |
|
| |
|
|
|
|
|
|
|
|
KipCody
medical school grad
Joined: 16 Jul 2013
Posts: 65
Location: Knoxville, TN
|
| Posted: Tue Jan 31, 2017 1:27 pm Post subject: |
|
|
After I replaced the dev unit, I ended up getting the same E-0336 error code. I re-calibrated the density settings and the error has never come back. Hope that helps with your issue!
Cheers |
|
| |
|
|
|
|
|
|
|
|
samiam
medical school freshman
Joined: 25 Sep 2007
Posts: 27
|
| Posted: Tue Mar 07, 2017 6:41 pm Post subject: |
|
|
| Broken post on the Black developer as well!! |
|
| |
|
|
|
|
|
|
|
|
gath99
intern
Joined: 24 Jul 2007
Posts: 125
|
| Posted: Mon Aug 07, 2017 7:52 pm Post subject: |
|
|
| I also ran into a clicking sound coming from the K dev unit. My issue was a broken belt on the dev unit. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
