|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
RLE medical school freshman
Joined: 27 Oct 2006 Posts: 24
|
Posted: Tue Oct 18, 2016 8:10 pm Post subject: 3100 speckling and short lines |
|
|
KIP 3100, Meter 74K. On the far right and far left the image has small, short (1/4" to 1/2"), thin lines and background (speckling). It's all random, comes and goes in no particular pattern.
The lines and speckling appears in a 6" column on the far right and the far left. I can see it on the drum when I open the unit, clean it off and it comes right back. Developer roller looks normal, toner level in the Developer looks normal.
I have units with more usage and the drum-cleaning roller has never been replaced and there is not an issue. (?) |
|
|
|
|
|
|
|
|
|
|
arlen resident
Joined: 30 Nov 2009 Posts: 157 Location: Salt Lake City, Utah |
Posted: Thu Oct 20, 2016 12:13 pm Post subject: |
|
|
Not sure, but have you checked the IM, and T/S corona wires, perhaps even just replaced them?
What about the assemblies themselves?
Had a 3000+ recently give me grief, the LED's were putting out all kinds of random images, it turned out to be an issue with the IM corona grid screen
Best wishes |
|
|
|
|
|
|
|
|
|
|
RLE medical school freshman
Joined: 27 Oct 2006 Posts: 24
|
Posted: Thu Dec 01, 2016 10:19 pm Post subject: |
|
|
By IM Corona I assume you mean the Charge Corona, yes, the Charge Corona has been cleaned. The image also had some hazy vertical lines, they disappeared when the Charge Corona was cleaned.
I cleaned all the Developer contacts, drum contacts, drum cleaning roller, but no change. Swapped the Developer and image is good. Then I put their Developer back in and the problem was gone. (?)
Yep, this one is going to haunt me in my sleep. |
|
|
|
|
|
|
|
|
|
|
jedi4342 medical school grad
Joined: 27 Aug 2014 Posts: 64
|
Posted: Mon Dec 05, 2016 5:45 pm Post subject: |
|
|
Make sure that the wiper blade on the blade roller in the developer mod. is cleaning the roller like it should be. Did you clean the optics? also check the fuser roller for excess toner. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|