 |
|
|
|
|
|
|
|
|
|
kipman
medical school grad
Joined: 13 Nov 2007
Posts: 58
|
 Posted: Mon Oct 10, 2016 12:24 pm Post subject: Kip 9900 blank prints every other set |
  |
|
We have a KIP 9900 with around 2 million square feet, that is putting out completely blank prints every other set, it does not matter if it is 1 sheet in the set or 100, if you print one page between sets it will print blank, then the next set is fine, if you forget to print one between the sets the whole second set will be blank. The prints look great when it is working. We cannot find anything wrong with the printer. Kip tells us to replace part after part with no change. Any help would be great. Thank you.
Last edited by kipman on Wed Oct 12, 2016 9:15 am; edited 2 times in total |
|
| |
|
|
|
|
|
|
|
|
eboucher
resident
Joined: 27 May 2008
Posts: 197
Location: Nashua, NH
|
| Posted: Tue Oct 11, 2016 9:46 am Post subject: |
|
|
Your transfer separation cortron block could be shorting out. I had to replace one a short time ago but all my prints were blank. I'm referring to the block the unit slides into. Part number is 7706400432 Tr Connection Block.
_________________
I'll have a tech give you a call shortly. |
|
| |
|
|
|
|
|
|
|
|
MDRepro
medical school grad
Joined: 12 May 2006
Posts: 69
Location: Baltimore, MD
|
| Posted: Mon Aug 28, 2017 12:02 pm Post subject: |
|
|
| @kipman Did you ever figure this problem out? I'm having the same issue. I have to print out at least one page in order to get the next set to print. Or if I put it on configuration for a little bit first, then the sheets will start printing out ok...it's like it's starting to print before all the info gets there. Thanks! |
|
| |
|
|
|
|
|
|
|
|
slyman
doctor
Joined: 23 Apr 2008
Posts: 467
Location: Sherbrooke,Quebec
|
| Posted: Tue Aug 29, 2017 8:53 am Post subject: |
|
|
It's look like a software problem to me, did you try different way of printing ? Win driver/Print/Print Net/USB/local print ?
Is your unattend / Pscript / softs are up to date ? |
|
| |
|
|
|
|
|
|
|
|
MDRepro
medical school grad
Joined: 12 May 2006
Posts: 69
Location: Baltimore, MD
|
| Posted: Tue Aug 29, 2017 11:39 am Post subject: |
|
|
This is happening whether I use Request or the Windows driver or if I send from different computers. If it starts printing blank and I hit "configuration" to pause it and then turn configuration off, it usually starts printing fine then. Sooo weird  |
|
| |
|
|
|
|
|
|
|
|
dlee
doctor
Joined: 07 Nov 2006
Posts: 1459
Location: E. Syracuse NY
|
| Posted: Wed Aug 30, 2017 10:37 am Post subject: |
|
|
| This might be totally off base but check the Cam and sensor that pushes the dev unit forward. I've seen flaky sensors that would not initiate the cam motor to push the dev unit forward and this would create blank prints also. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
