|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
TomJBell2 dreaming of medical school
Joined: 19 Apr 2016 Posts: 4
|
Posted: Mon Jun 06, 2016 2:37 pm Post subject: wrong firmware installed, now what? |
|
|
Last week we went to a customer and tried updating the Firmware, but for some reason, we were using the 7170's firmware. Now the machine seems dead, we got a E-0050 CPLD Configuration error and meter and nothing shows up.
I downloaded all the .MOT files for the 7100 and I'm planning on going back with a new DC Controller, but hoping ReImaging the HD with the recover disk and loading all the 7100's firmware may bring it back.
Has anyone else had this happen? |
|
|
|
|
|
|
|
|
|
|
tech2tech doctor
Joined: 04 Mar 2005 Posts: 377
|
Posted: Thu Jun 09, 2016 10:59 am Post subject: |
|
|
I did a firmware update on a 7170 a had a power outage in the middle of it. The machine was basically bricked at that point. I contacted Kip and was told I needed to replace the board Luke you are planning on doing. I did a little digging and found that the board has factory firmware that you can restore the board to. After doing so you are able to update the firmware. One additional thing you will need to do is enter the scanner serial number into the controller. If you have trouble locating the instructions let me know and I will see if I can find them again. _________________ "If you mess with a thing long enough, It'll break" |
|
|
|
|
|
|
|
|
|
|
TomJBell2 dreaming of medical school
Joined: 19 Apr 2016 Posts: 4
|
Posted: Thu Jun 09, 2016 11:07 am Post subject: instructions |
|
|
Thank you, I would like those instructions going forward, but I did replace the board but kept the old one.
Thank you.
tech2tech wrote: |
I did a firmware update on a 7170 a had a power outage in the middle of it. The machine was basically bricked at that point. I contacted Kip and was told I needed to replace the board Luke you are planning on doing. I did a little digging and found that the board has factory firmware that you can restore the board to. After doing so you are able to update the firmware. One additional thing you will need to do is enter the scanner serial number into the controller. If you have trouble locating the instructions let me know and I will see if I can find them again. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|