newbe1 doctor
Joined: 20 Aug 2009 Posts: 289 Location: Boise Idaho |
Posted: Wed May 11, 2016 1:13 pm Post subject: Solid Black line |
|
|
I have a 2300 scanner that is putting a solid black line same spot everytime. I will calibrate it will go away for a few scans, then comes back. I checked and cleaned scan glass also switched it end for end did not follow. I pulled off top and cleaned the glass inside and also checked platnum none of that helped. Pulled of cables from main board no change replaced memory no change. So i am thinking its main board was looking for other ideas. Thanks |
|