 |
|
|
|
|
|
|
|
|
|
MetroMatthew
medical school freshman
Joined: 16 May 2014
Posts: 10
|
 Posted: Fri Jul 10, 2015 9:10 am Post subject: Popping Sound when Printing out of bottom drawer (rolls 3&am |
  |
|
| For the last week or so our KIP 8000 has been popping when printing out of rolls 3 and 4 (the bottom drawer). I have replaced both clutches for that drawer, as best I can see all the gears look good behind that plate (haven't taken it apart to full inspect it), and I have even switched the entire drawer with another one from another 8000 we have that was not having this problem. I wouldn't think its the paper gate clutch and brake because I recently replaced that as well and it only does it coming out of the bottom drawer. Any help would be great thanks. |
|
| |
|
|
|
|
|
|
|
|
gjames
resident
Joined: 02 Apr 2008
Posts: 174
|
| Posted: Fri Jul 10, 2015 10:35 am Post subject: |
|
|
Might be the spindle brake. Try swapping the spindles to another drawer.
Or the Socket that the Drawer plugs into when shut. Contacts inside could be dirty or not springing against the plug.
_________________
"The bitterness of poor quality remains long after the sweetness of low price is forgotten." - Benjamin Franklin and John Ruskin |
|
| |
|
|
|
|
|
|
|
|
dlee
doctor
Joined: 07 Nov 2006
Posts: 1459
Location: E. Syracuse NY
|
| Posted: Fri Jul 10, 2015 11:01 am Post subject: |
|
|
| Check gears for broken/worn teeth also check gears that might have a crack in it but wouldn't be noticeable unless under stress. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
