|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
tcrawford doctor
Joined: 05 Oct 2005 Posts: 260 Location: Milwaukee, WI |
Posted: Thu Apr 23, 2015 9:58 am Post subject: 2160 Scanning-to-file stops after 10-12" and gives jam |
|
|
First off, it is not a feed/roller issue. This first happened last week and I reseated all the boards and RAM and swapped the SCSI cable to the top port. This seemed to resolve until last night. I tried a new SCSI cable but it did not help. I am suspecting the RAM or a bad SCSI board (in the scanner).
Anyone ever see this? _________________ Terry Crawford
BPI Milwaukee
16 years in large format repair, mainly KIP, Image ProGraf and Designjet, PageWide, 20+ years in the industry. |
|
|
|
|
|
|
|
|
|
|
mark in vegas doctor
Joined: 20 Oct 2010 Posts: 1852 Location: Las Vegas, NV |
Posted: Thu Apr 23, 2015 11:19 am Post subject: |
|
|
I have a 2160 doing something similar. Print feeds out about 2" and jams. Open/close the top and it will run for a while. The sensors seem OK on a meter but it sure looks like a wonky sensor. Stops in exactly the same place every time it jams. The problem seems gone for the time being, or production has given up telling me about it. I'd change out the exit sensor but to do so is a PIA. _________________ Regards,
Mark
RVN 68-69
It's so nice to be insane
No one asks you to explain |
|
|
|
|
|
|
|
|
|
|
tcrawford doctor
Joined: 05 Oct 2005 Posts: 260 Location: Milwaukee, WI |
Posted: Thu Apr 23, 2015 11:28 am Post subject: |
|
|
mark in vegas wrote: |
I have a 2160 doing something similar. Print feeds out about 2" and jams. Open/close the top and it will run for a while. The sensors seem OK on a meter but it sure looks like a wonky sensor. Stops in exactly the same place every time it jams. The problem seems gone for the time being, or production has given up telling me about it. I'd change out the exit sensor but to do so is a PIA. |
I suppose this could be a possibility. _________________ Terry Crawford
BPI Milwaukee
16 years in large format repair, mainly KIP, Image ProGraf and Designjet, PageWide, 20+ years in the industry. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|