|
|
|
|
|
|
|
|
|
|
PPCPete resident
Joined: 20 Feb 2005 Posts: 196 Location: Wisconsin |
Posted: Thu Apr 09, 2015 5:55 pm Post subject: Smudge/vertical line on first print out |
|
|
KIP 7100
First print out has smudge on right side/see pic. 2nd or 3rd do not. But if send another job......same thing happens.
Tried to ck. bias contacts/regrease them.drum ground and cleaner roller ground.
similar to the other Post!....
_________________ PPCPete |
|
|
|
|
|
|
|
|
|
|
tjohnson doctor
Joined: 23 Aug 2010 Posts: 508 Location: Idaho Falls, Idaho |
Posted: Mon Apr 13, 2015 10:43 am Post subject: |
|
|
It looks like that may be the same issue some old 3000's had, it was caused by the cleaning roller being too far away from the drum. If you loosened the brackets that hold it down it there was enough play to move it close enough to the drum to stop this from happening. |
|
|
|
|
|
|
|
|
|
|
PPCPete resident
Joined: 20 Feb 2005 Posts: 196 Location: Wisconsin |
Posted: Tue Apr 14, 2015 6:03 pm Post subject: |
|
|
As it turns out we replaced the developer roller for copy quality reasons and cleaned the excess toner from inside and then repressurised the rollers and the problem was gone. _________________ PPCPete |
|
|
|
|
|
|
|
|
|
|
tjohnson doctor
Joined: 23 Aug 2010 Posts: 508 Location: Idaho Falls, Idaho |
Posted: Tue Apr 14, 2015 7:01 pm Post subject: |
|
|
Thanks for the update! |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|