|
|
|
|
|
|
|
|
|
|
Tinne73 medical school grad
Joined: 21 Feb 2014 Posts: 54
|
Posted: Wed Jul 09, 2014 11:19 am Post subject: J-22 error |
|
|
Any ideas what exactly this error is for? is it to do with the drawers? or transfer area? |
|
|
|
|
|
|
|
|
|
|
CHILLIN doctor
Joined: 05 Oct 2006 Posts: 950
|
Posted: Wed Jul 09, 2014 1:34 pm Post subject: |
|
|
Kip 1200 Auto Stacker Error |
|
|
|
|
|
|
|
|
|
|
Tinne73 medical school grad
Joined: 21 Feb 2014 Posts: 54
|
Posted: Tue Jul 15, 2014 1:42 pm Post subject: |
|
|
Is there a common reason this error would keep popping up? new to the 1200 stackers and its almost impossible to find any literature on it... |
|
|
|
|
|
|
|
|
|
|
CHILLIN doctor
Joined: 05 Oct 2006 Posts: 950
|
Posted: Tue Jul 15, 2014 2:11 pm Post subject: |
|
|
There isn't much info on the stacker.
KIP has a TB that says:
J-22 = indicates that there is a misfeed / jam in the KIP 1200 ( K-54 ) Stacker.
Generally what I do is move the stacker from behind the machine and run some prints. If they exit the 8000 oaky then the issue is with the stacker.
If the it just gives the codes on occasion it usually is the feed tires are not pulling the paper through the stacker. In other words the 8000 is having to push the paper through the stacker instead of the stacker pulling the paper if that makes sense. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|