Welcome to the KeepItPrinting.com forums! The doctor is IN.

Your business can be seen here! Prime spots available!

Please consider making a voluntary donation if you find these forums helpful. Thank you.
Home of the Kip Doctor!            REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user                                                               name and password you would like. This is now required due to all the spambots that have been registering.
KeepItPrinting.com Forum Index KeepItPrinting.com
The "unofficial' and "unauthorized" KIP info site.


3000 Printing 46' X 30'

 
Post new topic   Reply to topic    KeepItPrinting.com Forum Index -> KIP 3000 and 3100
View previous topic :: View next topic  
DCan2014
dreaming of medical school


Joined: 21 Feb 2014
Posts: 3

 PostPosted: Fri Feb 21, 2014 4:19 pm    Post subject: 3000 Printing 46' X 30' Reply with quote Back to top

Here at our office we usually print out sheets at 36' X 24' and for the most part we never have problems. However, whenever I print a set of plans with larger dimensions such as 46' X 30' as an example, the pages begin to come out fine and then will begin cutting incorrectly and I'll eventually begin hearing a sound as if the paper is being crumbled up inside.

The end result will be pages with uneven dimensions and I have to stop the machine and line up the paper again.

Has anyone else been experiencing these issues and if so, is there anything you could recommend to resolve this problem.

Thanks,
Dan
 
View user's profile Send private message
bigal
doctor


Joined: 17 Apr 2007
Posts: 352
Location: TEXAS

 PostPosted: Fri Feb 21, 2014 4:43 pm    Post subject: Folding creasing Reply with quote Back to top

There is a KIP service bulletin. The Fuser speeds most likely wrong.
Also other things to check. Do you know how to enter service mode and change settings?
 
View user's profile Send private message Send e-mail Visit poster's website
DCan2014
dreaming of medical school


Joined: 21 Feb 2014
Posts: 3

 PostPosted: Fri Feb 21, 2014 4:52 pm    Post subject: Reply with quote Back to top

Thanks Bigal,

I believe I do know how to enter the service mode to check the settings; what should I look for?
 
View user's profile Send private message
dlee
doctor


Joined: 07 Nov 2006
Posts: 1459
Location: E. Syracuse NY

 PostPosted: Fri Feb 21, 2014 6:21 pm    Post subject: Reply with quote Back to top

The prints start to cut uneven and then crinkling throughout the machine can be heard, right? Sometimes there is a 1" fold in the middle of the print but you'll notice that the image isn't folded, which means that the fold is happening before the drum. Replace the Clutch Brake Assy (Part# 4612N-0) on the right side and the clutch (Part# 7106704020) on the left side of the resister roller. This is the roller that you see with the rubber rollers when you open up the process unit. Use a rubber cleaner and clean up the rubber rollers on this shaft also.
 
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    KeepItPrinting.com Forum Index -> KIP 3000 and 3100 All times are GMT - 3.5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum