|
|
|
|
|
|
|
|
|
|
cjohnson dreaming of medical school
Joined: 19 Oct 2012 Posts: 6
|
Posted: Wed Oct 24, 2012 5:05 pm Post subject: kip 2900 need help on dbl printing |
|
|
My Kip 2900 is dbl. printing from originals and I installed a new scraper bar. Any solutions? |
|
|
|
|
|
|
|
|
|
|
cjwilt doctor
Joined: 24 Jan 2007 Posts: 1041
|
Posted: Thu Oct 25, 2012 9:11 am Post subject: |
|
|
Have you replaced the charge wires?
Did you check the fuser roller?
Doing a stop print might help you find the location of the problem. If the image is ghosted on the drum then you know it's not the fuser. |
|
|
|
|
|
|
|
|
|
|
cjohnson dreaming of medical school
Joined: 19 Oct 2012 Posts: 6
|
Posted: Thu Oct 25, 2012 1:07 pm Post subject: KIP 2900 |
|
|
THANKS FOR YOUR SUGGESTION! I will check for ghosting on the drum at a stop print. |
|
|
|
|
|
|
|
|
|
|
cjohnson dreaming of medical school
Joined: 19 Oct 2012 Posts: 6
|
Posted: Thu Oct 25, 2012 1:09 pm Post subject: KIP 2900 / check fuser roller. |
|
|
It just occurred to me that I do not know how to check the fuser roller. Could you please elaborate? Much appreciated. |
|
|
|
|
|
|
|
|
|
|
cjwilt doctor
Joined: 24 Jan 2007 Posts: 1041
|
Posted: Thu Oct 25, 2012 1:34 pm Post subject: |
|
|
Open the fuser exit door and see if there is toner build up on the fuser roller. If there is, that could be the issue. |
|
|
|
|
|
|
|
|
|
|
cjohnson dreaming of medical school
Joined: 19 Oct 2012 Posts: 6
|
Posted: Thu Oct 25, 2012 7:41 pm Post subject: KIP 2900 / THANK YOU |
|
|
YOU are the KIP DOCTOR! It worked GREAT! A little cleaning of the wires and the extra toner out of the machine and it works like new! THANK YOU VERY MUCH FOR YOUR EXPERTISE! I'm very appreciative!!!!!! |
|
|
|
|
|
|
|
|
|
|
cjohnson dreaming of medical school
Joined: 19 Oct 2012 Posts: 6
|
Posted: Thu Oct 25, 2012 7:43 pm Post subject: KIP 2900 |
|
|
I know how annoying I am, since you obviously know a lot about this machine, any idea on how to make a physical print from the KIP 2900 from a scanned PDF or CPU? My manual doesn't really explain how to make a simple print.... |
|
|
|
|
|
|
|
|
|
|
cjwilt doctor
Joined: 24 Jan 2007 Posts: 1041
|
Posted: Fri Oct 26, 2012 11:47 am Post subject: |
|
|
Glad to help out.
Does your machine have a controller attached to it? If so you can send pdfs to print through the request software or by opening it in adobe and printing through the windows driver. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|