hubman dreaming of medical school
Joined: 10 May 2012 Posts: 2
|
Posted: Thu May 10, 2012 2:45 pm Post subject: KIP3100 Media Type incorrect |
|
|
My problem is in the "Kip Custom Properties for Current Plot" billing screen my Media Options are "Film, OnHold, Paper & Tracing". What I need is "Bond, Vellum, Film, & OnHold"; like is shows in my KIP PrintNET.
I am running AutoCAD C3D, kip10.hdi driver, connected to the KIP3100 through an IP Port, Software on KIP is 7.2.102.
In my KIP PrintNET the Media Types are correct as listed above & Roll Info is set to Auto. Enable Unified Accounting is checked.
In the .pc3 file through AutoCAD KIP Custom Properties the KIP is connected via IP Address and "Retrieve accounting data from printer" is checked.
I don't know what else to change and really don't want to re-install the driver.
Any help would be greatly appreciated! |
|