 |
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
 |
KeepItPrinting.com
The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
dlee
doctor
Joined: 07 Nov 2006
Posts: 1459
Location: E. Syracuse NY
|
 Posted: Mon Feb 01, 2010 12:11 am Post subject: 1880 thin white ghostly streaks |
  |
|
| I have a 1880 that is creating a white thin (1/4" thick) ghostly lines from leading edge all the way down to the trailing edge. I am not familiar with this copier, but on the other HDP printers, it would be compared to something blocking the LEDs. There are approx. 5 or 6 lines across a 36" print. Any clues??? |
|
| |
|
|
|
|
|
|
|
|
9lives
intern
Joined: 05 Jun 2006
Posts: 107
|
| Posted: Mon Feb 01, 2010 10:44 am Post subject: |
|
|
I would start with the charge corona wire. Basically the analog machine gives the opposite symptoms of the digital machine.
_________________
There is nothing more freeing than leaving a "perfectly good airplane" at 10,000 ft, landing safely, and packing up to go do it again! |
|
| |
|
|
|
|
|
|
|
|
wadetech
intern
Joined: 05 Jan 2009
Posts: 127
|
| Posted: Mon Feb 01, 2010 11:31 am Post subject: |
|
|
I would check to see if there is a build up of Toner on the Exit Fingers. Another thing to check is the toner around the doctor blade ( It sometimes clumps up and causes white lines ) If its missing before the drum, check Charge or the Clumping that was mentioned. If image looks ok on the drum, its in the fuser or the cleaning felt.
Good Luck
WT |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
