Charlie Brown doctor
Joined: 09 Aug 2005 Posts: 434 Location: Nashville Tennessee |
Posted: Sat Dec 10, 2005 5:07 pm Post subject: What a set up |
|
|
The second machine to be set up and it turn out to be a nightmare for me .
First the reg roller did not drop down right on the left side so I got black down the left side got that fix.
second while work on the dev unit to fix this the dev tool which cost a leg and arm broke it will not turn the dev unit at all.
third I came down on saturday to clean the toner spill up (coronas leds ect) I then got a shade down the left side ten mm across from top to bottem. I clean everything and check everything to find this problem and did not find the answer till by chance I stood on the left side while it was printing and the shade went away till I moved (sunlight coming in the damm window )
from now on I will set these up in my shop not the demoroom I have no windows . Well I just thought all of you could us a good laft on me if you have windows remember side cover must be on |
|