|
|
|
|
|
|
|
|
|
|
tibbs dreaming of medical school
Joined: 11 Oct 2008 Posts: 8
|
Posted: Mon Oct 13, 2008 3:06 pm Post subject: IPS starts but not main print engine |
|
|
This happens only sometimes...
You switch on the machine and the GUI starts as normal. However the main print engine does not power up. The LCD display is blank and COPY and SCAN is greyed out on the touch screen. All i have been doing to rectify this is powering down completely and rebooting and it starts without a problem.
This machine is an ex demo with very low mileage waiting to go out to a customer! Can anyone help?? |
|
|
|
|
|
|
|
|
|
|
jduggan medical school freshman
Joined: 13 Dec 2004 Posts: 17
|
Posted: Mon Oct 13, 2008 10:23 pm Post subject: no power |
|
|
Check and make sure the interlock for the fuser door is getting closed all the way.
Sounds like an interlock issue to me. |
|
|
|
|
|
|
|
|
|
|
tibbs dreaming of medical school
Joined: 11 Oct 2008 Posts: 8
|
Posted: Tue Oct 14, 2008 9:13 am Post subject: |
|
|
Thanks, I found that the fuser door was misformed causing the switch not to be made properly. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|