 |
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
 |
KeepItPrinting.com
The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
Cobra
medical school senior
Joined: 11 May 2006
Posts: 46
|
 Posted: Fri May 30, 2008 12:47 pm Post subject: Fuser Noise Upgrade Kit |
  |
|
| Anybody ever encounter trouble installing the fuser upgrade kit? We have a 3000 that started eating fuser drive gears and after installing the kit, the machine makes more noise than before. The fuser pressure has been backed off and there's no trouble turning the fuser section manually. However....there does seem to be more play between how the gears mesh up than there should be. There's no physical adjustment to make though. Everything is in a fixed position. |
|
| |
|
|
|
|
|
|
|
|
Charlie Brown
doctor
Joined: 09 Aug 2005
Posts: 434
Location: Nashville Tennessee
|
| Posted: Tue Jun 03, 2008 8:33 pm Post subject: Fuser noise |
|
|
I have found several problems with the fuser upgrade kit one more fuser drive gears breaking. but the most problem is the bearing coming apart and eatting up the shaft. I replace it with the oil lite bearings and if I am getting noise out of the fuser I have shim the fuse up closer to the drive gear. if you go back to the oil lite bearing and don't have the old frame that you swap out you have to leave the e-clip between the inside oil lite bearing the gear. work fine with clip out.
 |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
