|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
joe medical school grad
Joined: 06 May 2007 Posts: 65 Location: ohio |
Posted: Tue Jan 15, 2008 10:09 am Post subject: copy issue. |
|
|
i been working a a kip 3000 that leaving blank or light image on the trail edge d size prints.preformed the following:
1.adj. transfer timing.
2. adj. fuser pressure and fuser speed.
would be ok for awhile but would come back. now getting the trail edge blank or light print and right side of print missing image or light.
anyone know how to solve this issue?kip was no help issue.
thanks
joe |
|
|
|
|
|
|
|
|
|
|
dlee doctor
Joined: 07 Nov 2006 Posts: 1459 Location: E. Syracuse NY |
Posted: Mon Jan 28, 2008 10:18 am Post subject: |
|
|
I just ran into this same problem a couple of weeks ago. Anything printing over 40" would start leaving white spots and repeat images. First off, make sure you have the latest EPROM I believe it is K105X08A. I didn't, so I had to order it also. Then you will have to go in and adjust the 2nd and 3rd fuser speed for plain paper, modes 4-180 and 4-182 on page 8-80 of the service manual. You'll probably have to drop the numbers. You might also have to slow the Fuser Motor Speed # 4-316. You may also want to check out TB # TB-K105-008 and TB-K105-009. They reference 30" but also holds true to 34' & 36" also. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|