joe
medical school grad
Joined: 06 May 2007
Posts: 65
Location: ohio
 |
 Posted: Wed Dec 12, 2007 5:21 pm Post subject: void / light area at trail edge of prints. |
  |
|
i have a kip 3002 with 12,365 not that much. they have 36 and 30 in bonded paper. the trail edge of both sizes is light about 30 mm. itried fuser adj,drum adj with no help. i had to adj transfer corona off (038) from 45 to 70 to delay or keep the ts on longer. my question is will this affect the drum if the paper has already passed and the ts wires stay on? and is there another to correct this issue?
thanks for any help.
joe |
|
