|
|
|
|
|
|
|
|
|
|
Merlin1977 medical school senior
Joined: 23 Sep 2005 Posts: 35
|
Posted: Thu Sep 13, 2007 10:59 pm Post subject: What are the symptoms of a CIS failing??? |
|
|
I went to a call today with void areas. The prints looked just like a dirty printhead but it was clean. There are no void areas on test prints only on scans. I ran the white reference adjustment but it did not change anything. If I take it off of "AUTO" copy quality the print look much better even though I havent changed any of the settings. No void areas. But the prints are much darker like the density and/or threshold were bumped up. Can anyone help? Sound like a CIS??? |
|
|
|
|
|
|
|
|
|
|
Jay intern
Joined: 17 Feb 2005 Posts: 135 Location: Pensacola, FL |
Posted: Wed Sep 19, 2007 9:24 pm Post subject: What are the symptoms of a CIS failing??? |
|
|
We had a CIS fail. The results are a black stripe down the page. It measures exactly the measurement of the CIS.. We moved it to other spots and the stripe follows. Problem is we oredered a replacement 3 months ago anf KIP won't have them to even ship till the 24th of this month
Jay |
|
|
|
|
|
|
|
|
|
|
Jay intern
Joined: 17 Feb 2005 Posts: 135 Location: Pensacola, FL |
Posted: Wed Sep 19, 2007 9:27 pm Post subject: |
|
|
Forgot to add... we had a similar problem with grayscale images being lighter in certain places . plug in your laptop and do the white calibration. One of our techs said over and over the customer damaged the scanner and when i went out and recalibrated, it fixed the problem
Jay |
|
|
|
|
|
|
|
|
|
|
actrepro intern
Joined: 19 Jun 2006 Posts: 139 Location: Des Moines, Iowa |
Posted: Mon Nov 19, 2007 1:41 pm Post subject: |
|
|
can this also cause a solid thin white line on a print
on this 3000, there is 1 solid thin white line on the print
new drum, new corona wire, check dev unit
it is showing up on the drum, so it is not a transfer problem
the developer in not on the drum and it is a solid void of toner on the drum
thanks for any info |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|