 |
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
 |
KeepItPrinting.com
The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
lombardomarc
medical school freshman
Joined: 14 Feb 2008
Posts: 17
|
 Posted: Wed Jun 18, 2008 11:51 pm Post subject: 510 printing light |
  |
|
| Some light pen weights on a Xerox 510 are printing lightly on the right hand (control panel) side. I tried adjusting the led height and it got a little better. I really cannot see anyother way to lower it any further. Any help would be appreciated. |
|
| |
|
|
|
|
|
|
|
|
Tech
intern
Joined: 27 Jun 2008
Posts: 112
Location: Boise, Idaho
|
| Posted: Wed Oct 01, 2008 11:12 am Post subject: |
|
|
Hi: Do an emergency stop in the middle of a print by shutting the machine off. Look at the drum and see how much toner is on the drum. Lack of toner coverage on drum could be the image corona (scorotron) weak or grid dirty. The drum could be unseated from the frame also.
Plenty of toner could also mean the BTR is not pulling the toner off the drum and onto the paper or the corotron is dirty. Good luck |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
