|
|
|
|
|
|
|
|
|
|
ragazzi dreaming of medical school
Joined: 26 Apr 2007 Posts: 9
|
Posted: Mon Jul 23, 2007 3:15 pm Post subject: a no-brainer |
|
|
I can't find anything in the Heidi driver, Windows driver or touch-screen-interface of the Kip plotter itself that would allow me to print from the manual sheet feeder.
Am I missing something simple?
Thanks in advance!
Chris |
|
|
|
|
|
|
|
|
|
|
scott doctor
Joined: 06 Dec 2004 Posts: 570
|
Posted: Mon Jul 23, 2007 3:58 pm Post subject: |
|
|
I am fairly certain only Request can print to the cut sheet tray.
Scott |
|
|
|
|
|
|
|
|
|
|
cjwilt doctor
Joined: 24 Jan 2007 Posts: 1041
|
Posted: Mon Jul 23, 2007 4:32 pm Post subject: |
|
|
The only way I know to use the cut sheet is to make a copy through the scanner to it. I have never seen a way to do it through the software or drivers. |
|
|
|
|
|
|
|
|
|
|
scott doctor
Joined: 06 Dec 2004 Posts: 570
|
Posted: Mon Jul 23, 2007 6:55 pm Post subject: |
|
|
With 6.5 you can enable the cutsheet in the winreq.ini "AllowCutSheet=1"
This gives you the ability to print one file to one cut sheet from Request.
I have not tried to print to the cut sheet from the Windows or HDI drivers so I can't say for certian, but I seriously doubt you can.
Scott |
|
|
|
|
|
|
|
|
|
|
Neil Johnston doctor
Joined: 23 Dec 2005 Posts: 402 Location: Seattle, WA |
Posted: Mon Jul 23, 2007 11:18 pm Post subject: |
|
|
Also, by default you can not copy to cutsheet. You have to turn that option on in the Service menu. _________________ Neil Johnston
Sales / Support
www.TheWideFormatCompany.com
www.PlotTrackerPro.com - Kip Accounting Software |
|
|
|
|
|
|
|
|
|
|
cjwilt doctor
Joined: 24 Jan 2007 Posts: 1041
|
Posted: Tue Jul 24, 2007 8:35 am Post subject: |
|
|
I stand corrected. Thanks for the update, you both are correct. |
|
|
|
|
|
|
|
|
|
|
pq resident
Joined: 24 Jun 2005 Posts: 231 Location: Northern California |
Posted: Thu Jul 26, 2007 5:57 am Post subject: |
|
|
One annoying thing about cut-sheet copying:
The only prompt the user gets to insert the cut-sheet media is a faint beeping sound from the controller. If you don't listen carefully or know what to listen for you are out luck (most users anyway). The JOB INFO button is supposed to flash/turn orange but often it does not. However if you do press that there will be a message that specifies the size it needs to fulfill the job (per the size & media you specified when you chose cut-sheet). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|