KeepItPrinting.com :: View topic - Fuser Vibration Noise

Please consider making a voluntary donation if you find these forums helpful. Thank you.

Home of the Kip Doctor! REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.

KeepItPrinting.com
The "unofficial' and "unauthorized" KIP info site.

Fuser Vibration Noise

KeepItPrinting.com Forum Index -> KIP 3000 and 3100

View previous topic :: View next topic

CHILLIN
doctor

Joined: 05 Oct 2006
Posts: 950

Posted: Fri Jan 05, 2007 2:53 pm Post subject: Fuser Vibration Noise

I have a (2) 3000's that the fuser section is making a loud vibration noise. It seems to make the noise the worse when the machine is in standby mode, and the fuser is turning once in awhile. I have changed the fuser bearings which is definatly where it is coming from. I can let it vibrate and put some Tri-Flow on them and the noise goes away, but it seems to return about every 20,000 sq/ft. Any ideas?

Charlie Brown
doctor

Joined: 09 Aug 2005
Posts: 434
Location: Nashville Tennessee

Posted: Tue Jan 09, 2007 4:57 pm Post subject: Possible Try

Since the Triflow helps for a while maybe use a high temp grease like Never Sieze grease which you can find at several suppliers http://www.bostik.com.au/distribution_page_stuff/industrial_stuff/industrial_antiseize_page.htm

Display posts from previous:

	KeepItPrinting.com Forum Index -> KIP 3000 and 3100	All times are GMT - 3.5 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum