|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
tcrawford doctor
Joined: 05 Oct 2005 Posts: 260 Location: Milwaukee, WI |
Posted: Mon Jan 07, 2019 5:11 pm Post subject: 1000-0003-0063 error: HC Kickers motor - Driver fault |
|
|
We have an 8000XL that is randomly giving this error during regular printing. When I test the stacker in service it all checks out aside from one area. When I run the Kickers test 1 or 10 cycles at all speeds it works fine but when I run the Kickers and rollers test it will say 'Executing diagnostics....' (see pics) but never does anything, I can't even cancel out of it. It gets stuck and I have to do a shut down the unit.
It seems like a logic problem. HP support had no answer and suggested the main board. Seems like an easy cop-out answer to me.
-Terry
_________________ Terry Crawford
BPI Milwaukee
16 years in large format repair, mainly KIP, Image ProGraf and Designjet, PageWide, 20+ years in the industry. |
|
|
|
|
|
|
|
|
|
|
jedi4342 medical school grad
Joined: 27 Aug 2014 Posts: 64
|
Posted: Mon Jan 07, 2019 5:47 pm Post subject: |
|
|
I have had to replace the kicker motor on 1 of our stackers. After replacing it worked fine. When I took the old 1 a part I noticed a lot of paper dust around the encoder wheel and sensor. That may be all it is. Try cleaning it 1st, if that is not what it is, it could be the motor or drive board. |
|
|
|
|
|
|
|
|
|
|
tcrawford doctor
Joined: 05 Oct 2005 Posts: 260 Location: Milwaukee, WI |
Posted: Mon Jan 07, 2019 5:50 pm Post subject: |
|
|
jedi4342 wrote: |
I have had to replace the kicker motor on 1 of our stackers. After replacing it worked fine. When I took the old 1 a part I noticed a lot of paper dust around the encoder wheel and sensor. That may be all it is. Try cleaning it 1st, if that is not what it is, it could be the motor or drive board. |
What's odd is the kicker motor works fine in diagnostics but only hangs up when you try to run it with the rollers. _________________ Terry Crawford
BPI Milwaukee
16 years in large format repair, mainly KIP, Image ProGraf and Designjet, PageWide, 20+ years in the industry. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|