|
|
|
|
|
|
|
|
|
|
johnfds dreaming of medical school
Joined: 02 Jul 2018 Posts: 4
|
Posted: Mon Jul 02, 2018 4:17 pm Post subject: Print jobs sent to KIP 3000 ut nothing happends |
|
|
Just installed a used KIP3000. Assigned it a local IP address. We can get to its web interface just fine. Installed the Windows and AutoCAD drivers. If you send a print job to it nothing happens. What am I missing?
Thanks,
John |
|
|
|
|
|
|
|
|
|
|
bigal doctor
Joined: 17 Apr 2007 Posts: 352 Location: TEXAS |
Posted: Mon Jul 02, 2018 6:30 pm Post subject: Won't print |
|
|
Make sure workstations are on same range ip as the printer and subnet mask is the same. |
|
|
|
|
|
|
|
|
|
|
johnfds dreaming of medical school
Joined: 02 Jul 2018 Posts: 4
|
Posted: Mon Jul 02, 2018 6:34 pm Post subject: |
|
|
They are. I would have thought that was obvious since we access the KIP3000 web interface. |
|
|
|
|
|
|
|
|
|
|
jedi4342 medical school grad
Joined: 27 Aug 2014 Posts: 64
|
Posted: Tue Jul 03, 2018 10:26 am Post subject: |
|
|
Make sure firewall or other security features are not blocking it. |
|
|
|
|
|
|
|
|
|
|
jedi4342 medical school grad
Joined: 27 Aug 2014 Posts: 64
|
Posted: Tue Jul 03, 2018 10:27 am Post subject: |
|
|
Also make sure you can ping it in the command prompt |
|
|
|
|
|
|
|
|
|
|
dlee doctor
Joined: 07 Nov 2006 Posts: 1459 Location: E. Syracuse NY |
Posted: Tue Jul 03, 2018 11:17 am Post subject: |
|
|
Are you able to see the Meter A and the roll information on the touchscreen? Meter A and roll information gets it's info from Unattend. If Unattend is not running, those would be blank. Close the UI and check to see if Unattend is running. If it is or is not, launch it and send a print to see if it makes it to Unattend. If it makes it to Unattend, it should print or at least show up in the Job Queue. |
|
|
|
|
|
|
|
|
|
|
johnfds dreaming of medical school
Joined: 02 Jul 2018 Posts: 4
|
Posted: Tue Jul 03, 2018 11:41 am Post subject: |
|
|
1. How do I close the UI ?
2. How do I tell that Unattend is running ?
3. How do I launch Unattend ?
Thanks,
John |
|
|
|
|
|
|
|
|
|
|
dlee doctor
Joined: 07 Nov 2006 Posts: 1459 Location: E. Syracuse NY |
Posted: Tue Jul 03, 2018 2:16 pm Post subject: |
|
|
It's a process.
First confirm on the touchscreen UI that it is or is not showing roll information and if Meter A on the build sheet screen is showing a reading. If all are showing then Unattend is running. |
|
|
|
|
|
|
|
|
|
|
johnfds dreaming of medical school
Joined: 02 Jul 2018 Posts: 4
|
Posted: Tue Jul 03, 2018 2:44 pm Post subject: |
|
|
Could you answer questions 1 and ?
Thanks,
John |
|
|
|
|
|
|
|
|
|
|
jedi4342 medical school grad
Joined: 27 Aug 2014 Posts: 64
|
Posted: Tue Jul 03, 2018 4:41 pm Post subject: |
|
|
Will it print the built in test prints in service. That will at least let you know it does print. You can hook up a key board and mouse, and do a control alt delete and it should show you what all is running. There is another way but it's been a long time since I have done it that way or any way. Pagewide is taking over in my area. KIP is on the down hill slide. |
|
|
|
|
|
|
|
|
|
|
dlee doctor
Joined: 07 Nov 2006 Posts: 1459 Location: E. Syracuse NY |
Posted: Mon Jul 09, 2018 1:32 pm Post subject: |
|
|
Been on Vacation.
To close UI to get to desktop:
Home > Help > Service > log in (8495107) > Hit OK when Service Config screen opens up > Click on START (Green) > Click on RESET (Red)
There is a shortcut icon on desktop to launch Unattend (yellow circle w/ U inside of it). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|