|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
tcrawford doctor
Joined: 05 Oct 2005 Posts: 260 Location: Milwaukee, WI |
Posted: Wed Feb 01, 2017 11:30 pm Post subject: [C7800] Reoccurring black (repeat) background on RH side |
|
|
I have been fighting this issue for weeks. It will go away for a few days then return. I thought I had it fixed when I replaced the regulation roller cam on the RH side of the developer but the issue came back 2 days later. I tried a new drum, no good. I then found one of the teflon pads under the developer was out of place so I replaced it and when I ran prints the issue was gone, but came back again days later. Each time I fix it, it eventually returns.
The pics were supplied by the client so I am not sure the distance of the repeat marks.
http://imgur.com/a/n9n05 _________________ Terry Crawford
BPI Milwaukee
16 years in large format repair, mainly KIP, Image ProGraf and Designjet, PageWide, 20+ years in the industry. |
|
|
|
|
|
|
|
|
|
|
tcrawford doctor
Joined: 05 Oct 2005 Posts: 260 Location: Milwaukee, WI |
Posted: Fri Feb 03, 2017 8:58 pm Post subject: |
|
|
If anyone cares, I believe I fixed it. I found a bad bearing on the small gear on the LH side of the developer that is one of two on inside a gear. _________________ Terry Crawford
BPI Milwaukee
16 years in large format repair, mainly KIP, Image ProGraf and Designjet, PageWide, 20+ years in the industry. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|