|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
xerox_7 resident
Joined: 01 Jun 2006 Posts: 229 Location: Columbia, Mo |
Posted: Wed Apr 27, 2016 4:36 pm Post subject: E51 8 error |
|
|
I removed the charge corona, and re-strung the 2 charge wires. I cleaned the grid with water. It looked like the center of the grid was lightly rubbing on something. You could see like a lightly polished marking along tyhe center section of the grid and about 6 inches on either side of horizontal center. I put the machine back together and it ran prints yesterday. I did notice a haze buildup on the drum, but did not have time to clean it yesterday. Today, I removed the process unit scrubbed the drum down with alcohol after taking a soft cloth and wiping all of the loose toner from the drum. Now, after re-assembling everything I am at a E51 8 error. I know that the SM says a faulty HV Bias supply, but is there anything I could have put back together wrong. I vacuumed the cleaning roller and have also tried running without the cleaning roller. I have had the developer and process assy out one other time to clean a similar haze from the drum without any problems. Any suggestions?
Thank You
Alan
Triangle Blueprints. |
|
|
|
|
|
|
|
|
|
|
xerox_7 resident
Joined: 01 Jun 2006 Posts: 229 Location: Columbia, Mo |
Posted: Thu Apr 28, 2016 12:48 pm Post subject: E51 8 error |
|
|
Self inflicted injury. Somehow one of the compression springs in one of the electrode holders on the process frame came out. Made one and now it it works. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|