|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
Nathan_Snapper doctor
Joined: 08 Oct 2008 Posts: 274
|
Posted: Tue Sep 01, 2015 2:50 pm Post subject: Squigly Deletions and folds in Prints |
|
|
I have just recently getting lines that looks like the paper folds tward the canter of the prints. The lead edge comes out ok then it gets almost folded but mostly just deletions tward the center of the prints and then like a tree branches out.
|
|
|
|
|
|
|
|
|
|
|
p51d007 medical school grad
Joined: 01 Jun 2011 Posts: 98 Location: Springfield Missouri |
Posted: Tue Sep 08, 2015 1:44 pm Post subject: |
|
|
I had a skew that I fixed, by going back and releveling the machine, then, tweaking the color alignment, by way of the front right foot, got rid of it.
Is this an 80 or 7800?
I had to tighten the screws per the bulletin on another machine. _________________ 39 years in the small format business, large format since 2009. Toshiba D.A.T.E. trainer. |
|
|
|
|
|
|
|
|
|
|
Nathan_Snapper doctor
Joined: 08 Oct 2008 Posts: 274
|
Posted: Fri Sep 11, 2015 12:14 pm Post subject: |
|
|
This is the C7800. I looked through the Tech Tip K125-048 Void Image Possible causes. I took out the lower transport unit and still had those voids and folding. I changed the voltages to the transfer rollers to see if there was any improvement but i had no luck. All of the guides are not bent of dirty or really anything wrong with them. It was like 85% humidity for a while and we put some dehumidifiers in and it improved but came back after doing a job. we have changed media and everything to make sure there is no inconsistency. Its length ways a little after the lead edge it starts. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|