|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
Tinyminime medical school grad
Joined: 08 May 2007 Posts: 69 Location: Auckland NZ |
Posted: Wed Aug 05, 2015 7:00 pm Post subject: C7800 03-21 errors |
|
|
Hello all
We have a reoccurring problem with a machine constantly having transfer errors. Leave it alone for two hours and it will magically run without problems. Everything has been changed from the main board to the transfer rollers.
The machine is spotless but it is over 200 thousand meters. This has become quite a issue for this customer so I am hoping one of you guys can help!
Please see the description of the symptom below (according to the customer):
- This error only occurs when printing in colour mode.
- No issue at all when printing in Mono mode.
- Printing in Mono mode works fine even when getting this error message
- When the colour print job has started, it seem to work fine for the rest of the current job.
- This error does not occur during printing.
- The error seems to occur when the colour print job continues after the machine stopped and asks for toner replenishment.
- It seems to work again after turning the machine off from the main switch for a few hours and restart again.
Thanks Guys! [/b] _________________ I used to have hair!!! |
|
|
|
|
|
|
|
|
|
|
tech2tech doctor
Joined: 04 Mar 2005 Posts: 377
|
Posted: Mon Aug 10, 2015 11:46 pm Post subject: |
|
|
You will get some strange issues from the transfer rollers not having conductive grease on the end of the shaft. _________________ "If you mess with a thing long enough, It'll break" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|