|
|
|
|
|
|
|
|
|
|
newbe1 doctor
Joined: 20 Aug 2009 Posts: 289 Location: Boise Idaho |
Posted: Wed Apr 29, 2015 3:06 pm Post subject: Designjet T770 |
|
|
I have a HP designjet t770 where the customer is getting a 86:01 error, i did all the normal things like cleaned encoder strip cleaned and oiled carriage bar, made sure belt was in good condition, plus upgraded firmware. Well that was a month ago and now it has come back has anyone else had this or know of something i might have missed any help would be great. |
|
|
|
|
|
|
|
|
|
|
Placebo intern
Joined: 06 Dec 2012 Posts: 139
|
Posted: Fri May 01, 2015 11:13 am Post subject: |
|
|
The manual says it is a scan axis error but lists no corrective action
I would try cleaning/lubricating the carriage rails again. Is it in a dirty environment? |
|
|
|
|
|
|
|
|
|
|
newbe1 doctor
Joined: 20 Aug 2009 Posts: 289 Location: Boise Idaho |
Posted: Mon May 04, 2015 10:41 am Post subject: |
|
|
It is a very dirt environment i will give that another shot i am also wondering if it could be encoder strip to. |
|
|
|
|
|
|
|
|
|
|
Placebo intern
Joined: 06 Dec 2012 Posts: 139
|
Posted: Mon May 04, 2015 11:47 am Post subject: |
|
|
If it's a dirty environment then it wouldn't hurt to clean the encoder again. Just don't clean the lines off of it. |
|
|
|
|
|
|
|
|
|
|
cezwhat resident
Joined: 24 Aug 2005 Posts: 221 Location: On the Prairie |
Posted: Fri May 08, 2015 5:10 pm Post subject: |
|
|
If this issue keeps coming back I would recommend replacing the carriage motor. It has been my experience with printers in dirty environments. |
|
|
|
|
|
|
|
|
|
|
newbe1 doctor
Joined: 20 Aug 2009 Posts: 289 Location: Boise Idaho |
Posted: Wed May 13, 2015 3:36 pm Post subject: |
|
|
Problem solved it ended up being the carriage one of the plastic holders that hold the belt in place was broken thanks for all your help |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|