|
|
|
|
|
|
|
|
|
|
MackD medical school grad
Joined: 14 Aug 2007 Posts: 89
|
Posted: Sun Apr 19, 2015 7:03 pm Post subject: jamming issue |
|
|
I am getting a jam right at the inner transport, the paper lead edge feeds 7 inches after the cutter and then does a accordian deal on the drawer side. Any ideas? |
|
|
|
|
|
|
|
|
|
|
TXReproShop doctor
Joined: 04 Apr 2005 Posts: 300
|
Posted: Mon Apr 20, 2015 11:43 am Post subject: |
|
|
Drive gear that moves the inner transport belts? |
|
|
|
|
|
|
|
|
|
|
dlee doctor
Joined: 07 Nov 2006 Posts: 1459 Location: E. Syracuse NY |
Posted: Mon Apr 20, 2015 12:22 pm Post subject: |
|
|
Check the drive section (upper left side) where the gears, bearings, joint, etc. are. Check to see if the shaft is worn. If the bearings have come loose, due to the shaft being worn. Many things in that little section that goes bad. |
|
|
|
|
|
|
|
|
|
|
MackD medical school grad
Joined: 14 Aug 2007 Posts: 89
|
Posted: Mon Apr 20, 2015 7:05 pm Post subject: |
|
|
I believe I found my issue on the inner transport the coupling is broken not enabling the inner transport belts to spin...
Thanks |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|