|
|
|
|
|
|
|
|
|
|
Tinne73 medical school grad
Joined: 21 Feb 2014 Posts: 54
|
Posted: Mon Sep 15, 2014 12:51 pm Post subject: 9900 unattend |
|
|
Have a 9900 in our shop and the unattend isn't coming up. The icon is there, but it won't work. Any ideas? |
|
|
|
|
|
|
|
|
|
|
CHILLIN doctor
Joined: 05 Oct 2006 Posts: 950
|
Posted: Mon Sep 15, 2014 2:03 pm Post subject: |
|
|
Run a check disc on both the C & D drives. Select automatically fix errors. Usually fixes 90% of Unattend loading issues.
Also check the Unattend .ini file and make sure it is not blank. |
|
|
|
|
|
|
|
|
|
|
newbe1 doctor
Joined: 20 Aug 2009 Posts: 289 Location: Boise Idaho |
Posted: Mon Sep 15, 2014 6:21 pm Post subject: |
|
|
Had that same issue tried all the above and eventually had to reghost to fix. |
|
|
|
|
|
|
|
|
|
|
Tinne73 medical school grad
Joined: 21 Feb 2014 Posts: 54
|
Posted: Tue Sep 16, 2014 11:08 am Post subject: |
|
|
.ini file was blank, any ideas on how or why does that happen? I was also told later that the printer was just "shutting off" without the power button being flipped. I used an old .ini file, until I can reghost, and it works fine; no weird power down. |
|
|
|
|
|
|
|
|
|
|
mark in vegas doctor
Joined: 20 Oct 2010 Posts: 1852 Location: Las Vegas, NV |
Posted: Tue Sep 16, 2014 11:22 am Post subject: |
|
|
The blank .ini file may indicate a failing HD. I've gotten into the habit of running CHKDSK w/repair at least every visit or two. I also clear out the request and problem folders every call. May be a little overkill but the random oddball problems have almost disappeared from our gear in the field. _________________ Regards,
Mark
RVN 68-69
It's so nice to be insane
No one asks you to explain |
|
|
|
|
|
|
|
|
|
|
Tinne73 medical school grad
Joined: 21 Feb 2014 Posts: 54
|
Posted: Tue Sep 16, 2014 11:33 am Post subject: |
|
|
Thank You for the information I think it will help alot. |
|
|
|
|
|
|
|
|
|
|
jezebel09 resident
Joined: 12 Jun 2013 Posts: 209
|
Posted: Tue Sep 16, 2014 12:03 pm Post subject: |
|
|
Tinne73 wrote: |
.ini file was blank, any ideas on how or why does that happen? I was also told later that the printer was just "shutting off" without the power button being flipped. I used an old .ini file, until I can reghost, and it works fine; no weird power down. |
This was a quirk of the older versions of Unattend. This has been remedied with newer versions. The newer versions will inspect the .ini file prior to fully opening the software; if it is found to be blank/short, then the backup or last known good version will be loaded and the software will start normally.
Running a check disk isn't a bad idea, but usually this isn't the culprit. Typically it is the power down sequence and Unattend not closing properly. |
|
|
|
|
|
|
|
|
|
|
mark in vegas doctor
Joined: 20 Oct 2010 Posts: 1852 Location: Las Vegas, NV |
Posted: Tue Sep 16, 2014 12:05 pm Post subject: |
|
|
A better answer _________________ Regards,
Mark
RVN 68-69
It's so nice to be insane
No one asks you to explain |
|
|
|
|
|
|
|
|
|
|
Tinne73 medical school grad
Joined: 21 Feb 2014 Posts: 54
|
Posted: Tue Sep 16, 2014 3:28 pm Post subject: |
|
|
Thank You all for the awsome feedback. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|