 |
|
|
|
|
|
|
|
|
|
sbb
medical school senior
Joined: 11 May 2010
Posts: 45
Location: Phil
|
 Posted: Thu Sep 05, 2013 12:08 pm Post subject: J-02 @ startup |
  |
|
I have experiencing J-02 at startup and try to mask the error and start again, the same thing J-02 still there. Cleaned all terminals and sensors. is anybody experienced this before, any helps?
_________________
I killed a man
As the price of my transgressions,
Put the nails in His hands
For the cost of my redemption... |
|
| |
|
|
|
|
|
|
|
|
dlee
doctor
Joined: 07 Nov 2006
Posts: 1459
Location: E. Syracuse NY
|
| Posted: Thu Sep 05, 2013 3:18 pm Post subject: |
|
|
| You've got a jam in roll #2. Remove the paper roll from roll #2 and then start it and see if the error goes away. If it still gives you the error, you might have a piece of paper or something blocking the sensors. Make sure there is no paper dust or slivers of paper present. AFter making sure the drawer is clean of paper and dust, blow some canned air at the sensors. |
|
| |
|
|
|
|
|
|
|
|
Zoey
doctor
Joined: 15 Jan 2007
Posts: 359
Location: Midwest
|
| Posted: Thu Sep 05, 2013 5:34 pm Post subject: |
|
|
| I have also seen a dirty cutter do this. Another thing I just thought of, is that the foam strip they put on drawer one tends to corrode with age and fall into the paper path causing jams. If this is starting to corrode, I would remove it. |
|
| |
|
|
|
|
|
|
|
|
sbb
medical school senior
Joined: 11 May 2010
Posts: 45
Location: Phil
|
| Posted: Fri Sep 06, 2013 3:28 am Post subject: |
|
|
The error occurs only when the paper is installed. Changed already the sensor, still there. We will change also the clutch, we'll update you later.
_________________
I killed a man
As the price of my transgressions,
Put the nails in His hands
For the cost of my redemption... |
|
| |
|
|
|
|
|
|
|
|
scott
doctor
Joined: 06 Dec 2004
Posts: 570
|
| Posted: Mon Sep 09, 2013 12:17 pm Post subject: |
|
|
Paper slipping on the spindle when reversing or reverse not working correctly.
_________________
Any ideas expressed are figments of my imagination.
Any resemblance to reality is purely coincidental. |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
