|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
dlee doctor
Joined: 07 Nov 2006 Posts: 1459 Location: E. Syracuse NY |
Posted: Thu Jun 27, 2013 12:55 pm Post subject: 600 scanner on top of KIP5000 |
|
|
OK, so there is no section for a KIP600 scanner so since it sits on top of the 5000 and uses the 5000 IPS, I"ll ask my question here.
Why is it that when we COLOR SCAN-TO-FILE, there is always background. I have a customer that has this setup and no matter what setting they use (the few that there is) it always shows background. Most of it is on the right side as if one of the CIS is scanning darker than the rest.
I don't know if this might have anything to do with it but if I go into Service Mode, the White Balance button is grayed out. |
|
|
|
|
|
|
|
|
|
|
tjohnson doctor
Joined: 23 Aug 2010 Posts: 508 Location: Idaho Falls, Idaho |
Posted: Thu Jun 27, 2013 2:31 pm Post subject: |
|
|
This may be a stupid question, but could that icon be grayed out because there is no calibration sheet installed? I think that takes a different sheet than the one that comes with the 3000s. I think it has black and white areas on the correct sheet. If the CIS sensors are clean I don't know what else there is to do besides the shading, but I know any time you can in color most scanners will pick up the background believing it is part of the image. Does changing the density in the copy setting does it help? |
|
|
|
|
|
|
|
|
|
|
newbe1 doctor
Joined: 20 Aug 2009 Posts: 289 Location: Boise Idaho |
Posted: Mon Jul 01, 2013 3:01 pm Post subject: |
|
|
I know when i half to calibrate a 600 scanner i half to hook up my lap top to it and use the kip utility like you do when you calibrate a 300 scanner. |
|
|
|
|
|
|
|
|
|
|
doodad medical school grad
Joined: 03 Mar 2008 Posts: 72
|
Posted: Tue Jul 02, 2013 1:54 pm Post subject: |
|
|
The 5000 can use either a 600 or 600a scanner. You can not calibrate these scanners from the service menu. You need to install the utility and run it from the desk top or use a laptop. The calibration sheet for a 600 is different than a 600a.
Have you tried to use a different mode to do your scans? Photo line mode usually will have some back ground, line mode does not. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|