|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
kipman medical school grad
Joined: 13 Nov 2007 Posts: 58
|
Posted: Wed Feb 15, 2012 10:42 pm Post subject: E-07 when paper runs out, not from cutter |
|
|
I have a 5000 that is kicking my butt. When it runs out of paper it keeps feeding the last piece (that should rewind back in drawer) and as soon as that happens an E-07 pops up. It is nothing to do with the cutter because it is not trying to cut when it happens. That being said, I replaced the cutter assembly, all 4 drawer clutch's & 2 main feed clutch's, all paper sensors, dc driver board, dc controller, spool brakes, and clipped all wire ties. I have had the E-07 pop up sometimes during printing also, it does the same thing it keeps feeding the next print with out pausing and the E-07 pops up. Every time it happens the last print is leaving T/S and the next print is just getting to drum. So when you open the process unit you see paper directly in front and behind the T/S unit letting all 3 wires exposed.
Any help would be wonderful. |
|
|
|
|
|
|
|
|
|
|
kipman medical school grad
Joined: 13 Nov 2007 Posts: 58
|
Posted: Fri Mar 02, 2012 12:19 am Post subject: |
|
|
turned out after replacing almost everything the last thing I did was registration clutch and that fixed it. Good luck start with that if you have this problem. |
|
|
|
|
|
|
|
|
|
|
mark in vegas doctor
Joined: 20 Oct 2010 Posts: 1852 Location: Las Vegas, NV |
Posted: Fri Mar 02, 2012 12:53 pm Post subject: |
|
|
Usually the last part replaced fixes most things.......Thanx for the feedback! _________________ Regards,
Mark
RVN 68-69
It's so nice to be insane
No one asks you to explain |
|
|
|
|
|
|
|
|
|
|
dlee doctor
Joined: 07 Nov 2006 Posts: 1459 Location: E. Syracuse NY |
Posted: Fri Jan 11, 2013 5:43 pm Post subject: |
|
|
You are talking about the heavy metal clutch (Part # 3006700040) that is on the left side when you pull out the upper frame unit, correct?
The other clutches would just be the two on each drawer and the one on the left side of the machine right behind the latch, to open the upper frame and all of these are plastic bodies. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|