PPCPete resident
Joined: 20 Feb 2005 Posts: 196 Location: Wisconsin |
Posted: Wed Oct 03, 2012 11:17 am Post subject: 2050 scanner memory full error |
|
|
I keep getting the message "memory full error" on the Scan to file PC
This is a KIp 6000 with a 2050 scanner and a STF workstation.
Has the Kip scan program rev. 6.5.1 which i've reloaded.
I've increased the memory on the scanner itself from 64meg to 320meg.
Scanner on ver. 3.10 firmware
Auto memory "clear" is on.
BD # 290 set at "0"
BD # 300 set at "0"
The STC PC has 3gig memory......
What am I missing here? I also replaced the SCSI cable and the SCSI card in the STF PC.
_________________ PPCPete |
|