|
Home of the Kip Doctor!
REGISTER: In order to register for our forums please send an E mail to [email protected] stating what user name and password you would like. This is now required due to all the spambots that have been registering.
|
KeepItPrinting.com The "unofficial' and "unauthorized" KIP info site.
|
|
|
|
|
|
|
|
|
|
|
KipKen medical school grad
Joined: 14 Feb 2012 Posts: 82
|
Posted: Mon Mar 12, 2012 5:16 pm Post subject: Kip 1880 E9 Issues |
|
|
I went on a call on this customers machine where they were getting the E9 exposure lamp code.
I am not very familiar with this model, as I did not start working on these until only a few years ago.
The lamp was not turning on at all so I took it to another customers office that had one and tested it. The lamp works fine. So back to my problem machine I went. I followed the leads from the lamp back to the board they attach to and found that there was a fuse blown on it. this fuse is a 1A 250v fuse. I went to the hardware store and purchased said fuse and tried it. This new fuse also blew. I looked in my bag and despite the message on the board that says: "use only proper rated fuses to avoid risk of fire" I pulled out a 3A 250V fuse because it was the only one I had. I thought I would try it fast to see if it would fix the issue. Bad Idea, The board popped and smoked for a sec before I could turn it off. It seems only one circuit was damaged, but I do not know how much damage was really done. Machine still powers on warms up then throws the E9 code so your guess is as good as mine.
Is anyone able to help me with this mess?
I realize I may need one or two boards at this point because of my carelessness. but what would cause the machine to start blowing those fuses in the first place, and do you think I have ruined the board that these fuses are on by using the 3Amp fuse? _________________ Ken |
|
|
|
|
|
|
|
|
|
|
CHILLIN doctor
Joined: 05 Oct 2006 Posts: 950
|
Posted: Mon Mar 12, 2012 9:15 pm Post subject: |
|
|
Had an issue years ago and if my brain serves me correctly it was one of the lamp connectors. Pm me if you need any boards or parts. I have more than 1 of everything. |
|
|
|
|
|
|
|
|
|
|
caltech doctor
Joined: 24 Feb 2006 Posts: 262 Location: Northern California |
Posted: Tue Apr 24, 2012 12:27 pm Post subject: |
|
|
If you are still dealing with this issue we have an 1880 parts machine here. Let me know what you need and I'll see if we have it. |
|
|
|
|
|
|
|
|
|
|
mark in vegas doctor
Joined: 20 Oct 2010 Posts: 1852 Location: Las Vegas, NV |
Posted: Tue Apr 24, 2012 2:24 pm Post subject: |
|
|
A 3 amp fuse isn't bad......we used a 1/4 20 screw to find the bad board when we didn't have any fuses in Vietnam. Then all you had to do was follow the smoke. When I think about it, it still amazes me that we were able to get anything to fly over there....... _________________ Regards,
Mark
RVN 68-69
It's so nice to be insane
No one asks you to explain |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|