chmu dreaming of medical school
Joined: 25 Aug 2011 Posts: 7
|
Posted: Sat Sep 03, 2011 4:05 pm Post subject: Problems after ghosting / KIP 3620E no connection to PC |
|
|
Hi,
I still have probs to get the old 3620E running.
In the meantime I built up a PC using the following board:
D845GEBV2
The hard disk has two partitions (C and D).
Re-ghosting (4.5. worked very well - NT starts up perfect. I choosed "External Controller..." and when booting up NT "NON-SCSI / STD. W/O PROMISE".
The driver kipdrvr.sys is running. The software revision on the KIP card is 1a (boardrev:1a).
The *.ini - files I checked and changed all named printers to 3620.
But it seems I dont get any "connection" to my printer. With switches on or off printer WINSTAT always tells me "Error 133 - Paper Jam". Also WINSTAT always mentions a printer 9820 instead of my 3620E.
Is there something wrong in BIOS setting of the board or did I mistake (or didnt made neccesary changes) in the *.ini files?
Any help I really appreciate.
Thanks a lot,
Christian |
|