tcrawford doctor
Joined: 05 Oct 2005 Posts: 260 Location: Milwaukee, WI |
Posted: Thu Apr 07, 2011 11:17 am Post subject: Stitching issue on a 2050 scanner line in center. |
|
|
I have a 2050 Scanner that started with a faint line in the center of the copied/scanned image. At first it appeared to be dirt on the glass or a scratch. But I soon realized it isn't. The line is in the very center and I tried several Shading calibrations and the issues only got worse. Now the issue went from a stitching line it's now the stepped up/down on the left/right (I can't recall which side) by about 1.5mm. So B.U.D. 53 & 54 have no affect or change for that.
Any ideas? I was told try the CPU board or Image Processor board. _________________ Terry Crawford
BPI Milwaukee
16 years in large format repair, mainly KIP, Image ProGraf and Designjet, PageWide, 20+ years in the industry. |
|