|
|
|
|
|
|
|
|
|
|
KIP Dude resident
Joined: 14 Feb 2006 Posts: 164 Location: Outside USA |
Posted: Thu Sep 14, 2006 1:17 am Post subject: Repeating lines |
|
|
I'm getting two horizontal lines about 1-1/8" apart repeating every 10". Drum shows no marks and dev. unit is new. ??? _________________ Everytime something is made idiot proof... the world creates a better idiot! |
|
|
|
|
|
|
|
|
|
|
Jammin intern
Joined: 04 Sep 2007 Posts: 121 Location: Colorado |
Posted: Thu Feb 18, 2010 4:41 pm Post subject: |
|
|
have you found the problem to this is one? I am having exact same problem with no luck. |
|
|
|
|
|
|
|
|
|
|
CHILLIN doctor
Joined: 05 Oct 2006 Posts: 950
|
Posted: Thu Feb 18, 2010 5:10 pm Post subject: |
|
|
If it is 9 7/8th of an inch apart then most likely it's drum related. Check the drive gear on the drum and the gear that drives the drum might have a tooth missing, or look at the drum for any marks. Might also look at the gear that drives the cleaning roller behind the drum.
If it closer to 9 inches then look at the pressure roller. |
|
|
|
|
|
|
|
|
|
|
gzspark61 medical school senior
Joined: 11 May 2008 Posts: 33 Location: northren virginia |
Posted: Wed Feb 24, 2010 1:50 am Post subject: |
|
|
Don,t forget the ground to the print head from the main charge.
At times this can get OUT of WACK. |
|
|
|
|
|
|
|
|
|
|
gath99 intern
Joined: 24 Jul 2007 Posts: 125
|
Posted: Tue Mar 02, 2010 3:57 pm Post subject: Re: Repeating lines |
|
|
KIP Dude wrote: |
I'm getting two horizontal lines about 1-1/8" apart repeating every 10". Drum shows no marks and dev. unit is new. ??? |
Not sure if you read the other post similar to this(link provided below), but the 20T gear on the regulation roller was causing this problem for me last week. It's on the right side and has two tiny set screws in it. The gear was slipping on the reg. roller shaft and cause this for me. Try unscrewing the tiny screws and re-setting it.
http://keepitprinting.com/v-web/bulletin/bb/viewtopic.php?t=4036 |
|
|
|
|
|
|
|
|
|
|
Looooopy dreaming of medical school
Joined: 16 Dec 2004 Posts: 4 Location: Oh. |
Posted: Fri Mar 05, 2010 4:21 pm Post subject: |
|
|
gath99 is correct ive had this to. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|