|
|
|
|
|
|
|
|
|
|
bigdog464 dreaming of medical school
Joined: 11 Nov 2008 Posts: 3 Location: MT.VERNON |
Posted: Fri Nov 14, 2008 10:47 pm Post subject: KIP 2900 |
|
|
I HAVE A KIP 2900 AND I,M GETTING A EF48 ERROR CODE ON THE MAIN BOARD AND A TONER LIGHT IS ON .I ADDED TONER BUT THE LIGHT REMAINS. CAN SOME ONE HELP ME BECAUSE I DONT HAVE A MANUAL [/b] |
|
|
|
|
|
|
|
|
|
|
Brainz resident
Joined: 28 Oct 2008 Posts: 210 Location: World |
Posted: Mon Nov 17, 2008 2:09 am Post subject: |
|
|
EF is the fuser motor that is overloaded either by a jam or something else |
|
|
|
|
|
|
|
|
|
|
Shyloh medical school grad
Joined: 09 Oct 2008 Posts: 97
|
Posted: Tue Nov 18, 2008 11:57 pm Post subject: EF Error Code |
|
|
An EF error code can be caused by a shorting transfer assm. I would replace the wires and clean all around the TS assm. If that does'nt fix it, I would replace the fuser motor and driver board together. _________________ Can we fix it! |
|
|
|
|
|
|
|
|
|
|
bigdog464 dreaming of medical school
Joined: 11 Nov 2008 Posts: 3 Location: MT.VERNON |
Posted: Wed Nov 19, 2008 11:29 pm Post subject: |
|
|
THANKS FOR THE INFORMATION BUT COULD YOU TELL ME WHERE IS THE ASSM LOCATED? |
|
|
|
|
|
|
|
|
|
|
Shyloh medical school grad
Joined: 09 Oct 2008 Posts: 97
|
Posted: Thu Nov 20, 2008 12:36 am Post subject: Transfer Assm |
|
|
To get to the transfer/seperation assembly open the "clamshell" it is located under the drum. There are two plugs on the right hand side you have to unplugg then the assembly lifts up and out. You need to clean the whole assembly and replace the corona wires. _________________ Can we fix it! |
|
|
|
|
|
|
|
|
|
|
DELETED Guest
|
Posted: Sun May 24, 2009 8:50 pm Post subject: Cosplay in North America |
|
|
DELETED |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|