KeepItPrinting.com

Can any one tell me how the line pitch would change.

Thanks

Does any know for sure if a 300 stacker will work with a 7100.
and if so what did you do to get it to work.

thanks

reprographic technology 1-888-746-1802 dereck hamilton

sorry about the delay. the printer has 714378 sq ft on it.
every thing is up to date.

tj, I resent you the sample this time I wrote on it right here view it vat 200 % though. thanks for your help

tj, about an inch or so down under the word paper u should see the bar that runs across the whole print then scroll down to the yellow star second point from the left u can see it again. if you are vi ...

TJ, check your e-mail

TJ, I have ran the colors by themselves and they look good. it's just when we print these signs or others with a large mass of color that we get this banding. the back ground is a dark blue the bandin ...

I have banding on large color area's only everything and I mean everything is or has been replaced or up to date ANY IDEA'S PLEASE .

THANK YOU Mad

Sorry, my fix was the board for DCP BOARD HAD A FUSE THAT WAS BLOWN

After digging into this further found that yellow dev unit needs to be replaced. will let you know the results.

thanks for the input.

CJ, I did wipe down the print heads and changed the ads wires and charge wires. cleaned t/s wires. also did some adjustments with no results.

does any know what cause's banding on the kc 80 I cleaned all the wires they look good everything else is up to date what is it that i'm missing. you can see it in the blues, red, green, orange colrs ...

Try AZON PHONE 800-260-0839

well we did that and I know that its not on the printer side because 30 other user can print fine.