KeepItPrinting.com

If I remember correctly there was never a part # issued because it was designed to last the life of the machine. I removed mine completely and the prints look much better and the main charge corona s ...

It sure doesn't, I'm a bit of a simpleton! Stay safe and warm in Vegas Mark!

I always wondered what if would feel like to be the first to post in a new model, now I know.. it is just a tiny bit uneventful! Happy New Year!

From what I've heard lately, HP had delayed the introduction due to problems with printhead maintenance time, it pauses in the middle of print jobs to perform maintenance. Many delays make me wonder ...

I had forgotten to post what was happening on this machine. It definitely was transfer roller related, cleaning and greasing that roller was the fix.

Mine has been running all this time with virtually zero problems. About a year or so after this model was released Kip did an update to it that required a new style developer unit and every type of b ...

Yes, that is right, but what I'm asking is if the controller has anything below 6.5.485 that the patch does not work. It seems to me I've had to update some earlier versions of 6.5 to get request to ...

I'm trying to think that far back, is that version of request able to have the mixed environment patch installed or does it require 6.5.485?

HP released a troubleshooting flowchart for this model if the screen is black, not blue so I'm not sure you have the problem they are talking about. Either way, it steps you through being able to det ...

They do not offer board repair, so this board is past its warranty period?

I've also seen the adhesive from the white labels holding the new paper rolls tight transfer to the drum, get sticky with toner and then at some point stick back to the paper as it goes through the ma ...

Does this machine have the latest fuser drive update kit installed? If so, I replace the heat roller bushings along with the gears at the same time. I also back off the fuser pressure as they typica ...

You can't use a 1051 toner supply roller in a 1050. I know of no sources for the 1050 toner supply roller either.

I had a similar issue once on my 9900 when I rebuilt the DV unit, one of the gears, the one with the woodruff key, is shown backwards in the manual, I double checked with the manual to make sure I had ...

i was fortunate enough to go to Detroit over superbowl weekend, the 2nd worst snow storm in their history, shut the place down the first day. The previous year I was sent to Atlanta for training, whe ...