KeepItPrinting.com

Also Gill Repro has a location in Phoenix I think.

Thanks, I will look into both of these.

Thank you!

My wife and I relocated to the Phoenix area. I gave a 3 month (open ended) notice to my employer that ends on December 13th, if I cannot find work. I am a 21 year vetern of Copiers/printers and 16 y ...

Sounds like you've done all the steps. HP support is next. Point of information, the cutter in drawer 2 is only used to trim the paper roll, isn't used during print (makes a good spare).

I left out ...

The error code slightly differs depending on which drawer you run it from since this is happening from all four rolls on the printer.

My issues first start with random jams flagging these errors. ...

I have had to replace the kicker motor on 1 of our stackers. After replacing it worked fine. When I took the old 1 a part I noticed a lot of paper dust around the encoder wheel and sensor. That may be ...

We have an 8000XL that is randomly giving this error during regular printing. When I test the stacker in service it all checks out aside from one area. When I run the Kickers test 1 or 10 cycles at ...

Back story, this is for a client that runs the living snot out of two C7800's both with heavy coverage. This client runs so much and is such a good revenue stream for us that we have bought whole pri ...

First what level firmware and software are you running and I've had issues after firmware updates where the bud settings for paper get all f'd up. You can download the correct BUD setting from Kip's ...

Are the media Buds set correctly and have you tried adjusting the fuser enterence guide plate? I'm assuming you're jamming in the fuser but is it happening earlier in the print process?

Your quest ...

We have quite a few 800's in the field and so far I have 4 of them now that I have had to add more white space to the LE (like 3-4mm more) because when they run something with high toner coverage like ...

How do you have the USB drive formatted? I believe FAT32 is most likely to play well on an HP.

I'll have to check, good chance it's NTSF but that's mine, the other one that didn't work was the clie ...

Simple question, I plug in a USB flash drive (tried more than one) and when I navigate to the folders I have with files in of a variety of formats, PDF, JPEG, TIFF, DWG, etc, I get the error seen in m ...

If anyone cares, I believe I fixed it. I found a bad bearing on the small gear on the LH side of the developer that is one of two on inside a gear.

I have been fighting this issue for weeks. It will go away for a few days then return. I thought I had it fixed when I replaced the regulation roller cam on the RH side of the developer but the issue ...

I will be heading to this call after I finish this post, this will be my second trip to this client for this complaint. The first time I found no visible issues. I pulled the BK dev since it seems to ...