KeepItPrinting.com

3 roll - 510dp with 2ips colour and postscript in BC Canada. Full rebuild.
Very low feet. 295k linear feet - 675k square feet.
Good unit, but our client wanted all KIPs (Utility company)
$12k

developer is only $70 per bag with katun.com in Canada for the FW series of Ricohs.

The two above scanners are identical except that the KIP600 usb driver does not work on the Graphtec scanner.

What I'm trying to do is get a Graphtec scanner to work with KIPCOPY and/or KIPSCAN.
...

I agree. It's new and should work. You're a new tech and probably doubt your abilities at times, which can be expected. But the Doc is right.
It's time to package this box up and ship it back KIP - c ...

It really depends on what type of repeat it is...

#1 Check distance with a ruler between repeats.
approx. 9.5" means it's drum related
approx. 7" means it's fuser related

Try prints ...

Turning "Transfer support ON" will slightly increase the amount of voltage on the trasfer wire, thus ensuring proper toner transfer from the drum to the paper. This may or may not solve the issue, but ...

Is this a brand new KIP3000 out of the box? How many linear feet?

* turn transfer support on

Could be a flakey file. I inow it's not much help.
I've seen files fail 2 or 3 times in a row (printing a bad file page). And then all of a sudden work (and then later fail again).

I read somethin ...

KIP9000.
Printing blanks. (although it's working now - self corrected somehow)
I determined the Dev. Position Motor was OK, but the eccentric cams were mispositioned.

When viewing encoder disc f ...

Hello,
I'm getting E-031 and E-034 erros on a 5000.
Happens every 1000 prints or so and will stop the machine
with a print 3/4 the way out of the fuser.

I can not locate the error code in my man ...

Developer roller line issue?
First I've heard of it. What exactly is happening? I have three 5000's out there that are getting good use. I'd like to be prepared.
Thanks

hey Doc,
Not effictiently, no. You can create whatever prefix you like and it will automaticaly use numerical increments.
You would have to rename them later (in one session) rather than on ...

Did you get this worked out Bill? I have the same setup out here with
no problems. Maybe I can help.

I have three 7000's in my repro department. All three have had the problem you mentioned. I fixed the problem by replacing the regulation roller cleaning blade.
***HOWEVER***
The cleaning blades th ...

You should be able to choose the SMB (Server message block) option and set it up to scan directly to folder(s) anywhere on the network. It's way faster and easier. No need to run scan software on a PC ...