KeepItPrinting.com

This is still a problem. Over 40% INK left in the printer on all colors. It still doesn't fill the printhead. Just came across one today. Brand New printhead the 727/732 new type and the old 727 i did ...

Wondering if anyone has a transfer sep assembly they want to give away lol
I am looking for one.

They are called canon ink absorber pads if i am not mistaken. .

Wondering if anyone has ever worked on or replaced the purge unit blocks and where to purchase them. The little white blocks that sit in the purge assembly or if you are used to HP terminology it the ...

5494 That was it! That is exactly what i needed. Thank you !

Does anyone know the incremental purge code for the service mode ? I can get into the service mode with 3174 but cannot do the "Incremental Purge" because of the code isn't in the service manual.

I have had the bad PCA before and it has been a terrible journey with these expensive print heads. I even go into the service mode and do a prime to the head but seems the printhead is back not the in ...

I have this problem where the printhead isn't filling with ink. I know it usually indicates the IDS system but everything tested out positive through the service utilities. Now i have 2 printheads wit ...

Dang Mice! Don't they know customers have to print !

They came out with new sensors for this. Just in case everyone was wondering . Have to take the whole belt assembly out to replaced them.

Also adding to this there is a clip that they came out with to make sure the drive belt doesn't get shredded. Have to check the tech bulletins to see but it keep the belt from sliding.

I am at my wits end here with this Designjet T1500. Replaced everything but the hard drive. I am doing that next. Here is what it says to me all the time. I can put the ink in and it detects that jus ...

This problem started out as Abnormal output process 3 transfer charger and swapped the board with #2 then put new board on #2 and then #3 was ok but #2 was now giving the 4-21 error.

So here is wha ...

So i replaced clutches in the drawer and the registration clutch. with new ones. and th J-0206 is still happening the way it looks in the picture. Sometimes i can
get about ten pages out of the print ...

OK well i have dealt with this code before. The J-0206 is not unfamiliar. Its like a jacket you put on in the morning. Change out the sensors and make sure all the wires are good and unbound from the ...