KeepItPrinting.com

You may need to look at the Installation documentation for a new 1200 stacker; KIP+1200+-+KIP+75-79-7170K-7770K-7970K+Install+Manual+ver+F_5c1
When you connect it to a 7170 or 75 Series printer you ...

so the serial number of the stacker is higher than the one mentioned but I noticed the dip switches were all off and there is the 8000/9000 eprom installed. I tried flipping the #1 dip switch and test ...

Thanks, the stacker adjusts in hieght to the right level as ive tried it already but the two devices are no comunicating so I assumed it was some sort of software or firmware if not hardware issue.

Just looking to find out if its possible. customer uses the 7570 to replace their 8000 since they also have a color kip. they bought it used without a catch tray. I have tried to see if it would recog ...

I figured it best to post here since its a related topic.. is there any way to get a stacker from an 8000 to work with a 7570?

I used to pick up the proper series Dell optiplex pcs for free from our local recycling center and transfer the licensing to it but then I would run into the issue where the main boards were all the s ...

We had a 2500 do this when it needed its first printhead replacement... needless to say 5 printheads later and after escalating it with hp and replacing every conceivable part sometimes multiple times ...

I am surprised at this thread being from 2012 as even in 2020 as far as I know I can still order any part for the xerox/fuji 6204 here in the states as they are still supported as far as tech support ...

just sent you a pm

I believe I have a couple assembies in my garage Ill go look now... just tossed a bunch of stuff including glass and ballast for these.

I have had better luck replacing the poor quality capacitors on the motherboard than replacing the board and having the issue return a few years later.. pluse all licenses including windows are uneffe ...

https://www.ebay.com/itm/KIP-8000-9000-DC-Junction-PCB-3506260150-PW3597/184045800645?hash=item2ad9fc0cc5:g:LVkAAOSw9fZd1vud

Not me but came across it yesterday coincidentally

Still looking?

The company I work for hasnt been a Kip dealer for a few years now yet I still get contacted for and obtain replacement keys for my previous customers. I now keep a backup of all the keys as I do this ...

Had this a couple of times....
Bad motherboard!
hard to find locally, Kip does have some. another option is to replace the bulged cheapy 6.3v 1000uf capacitors on the main board and not have to wor ...